Shure V15 Type III

D.C. Resistance: 1350 ohms
Output Terminals: 4 terminals
V-15 Type Ill Styli
Available: VN35E Biradial (Elliptical) Stylus, (as supplied
in V-15 Tvoe Ill Cartridge). Diamond Tio
18 micro;; (.KO7 inch) 'irdnta~ radius
'
5 microns (.KO2 inch) side contact radii
25 microns (.001 inch) between record
contact points
VN3-G Spherical Stylus (as supplied in V-15
Ill-G Cartridge), Diamond Tip
15 microns (.0006 inch) radius
VN78E Biradial (Elliptical) Stylus, Diamond Tip
for monophonic 78 rpm records
Tracking Force Range: 1% to 3 grams
63 microns (.0025 inch) frontal radius
13 microns (.0005 inch) side contact radii
89 microns (.0035 inch) between record
contact points
Mounting: 12.7 mm (standard '11 in.) mounting centers
Net Weight: 6 grams

Fostex GX100 New Incoming

Krell KSA 250

Description: Solid-state class-A stereo amplifier.
Rated minimum continuous output power: 250Wpc into 8 ohms (24dBW), with no more than 0.1% THD; 500Wpc into 4 ohms (24dBW), with no more than 0.1% THD; 1kWpc into 2 ohms (24dBW); 2kWpc into 1 ohm; 4kWpc into 0.5 ohm (24dBW).
Frequency range: 0Hz–250kHz.
Input impedance: 47k ohms, non-inverting and inverting inputs.
Input sensitivity: 2.3V. Slew rate: >100V/µs. S/N ratio: 120dB, "A" weighted.
Power consumption: 12A continuous.
Dimensions: 19" W by 8.5" H by 24" D (including front and rear handles).
Weight: 140 lbs.

Audio Research CD2

Frequency response 0.1-20,000Hz ± 0.2dB
Distortion -90dB (.003%) 1kHz
S/N ratio 96 dBA
Phase linearity ±0.5! 20-20,000kHz
Channel separation 100dB 1kHz
Resolution 20 BIT DELTA-SIGMA DAC
Output impedance (Analog) 350 ohms BAL, 175 ohms SE
Analog outputs Balanced XLR 4.2V RMS (+12.5dBv) max
Single-Ended RCA 2.1V RMS (+6dBv) max
Digital outputs XLR Balanced AES/EBU 110-ohm 4V P-P
BNC coax SPDIF 75-ohm 0.7V P-P
TOSLINK fiber optical-19dBm, 660nm
(Optional) ST-type glass fiber optical -12dBm 875nm, 62.5/125µm fibers
Drive mechanism Optical pickup: Type: 3-beam LDGU
Laser:
Servo: Digitally-controlled
Wow & flutter: Unmeasureable (Quartzstability)
Jitter reduction: High-stabillity crystal-controlled re-clocking for all outputs
Discs: Accepts 5" (12cm) and 3" (8cm) sizes
Display: Six-digit vacuum fluorescent, with optical filter

Sumiko Blue Point No.2

Cartridge Type MC
Frequency Response 15Hz-35KHz
Output Voltage/Channel 2.5mV
Channel Separation 32dB
Channel Balance 0.5dB
Compliance (x10-6 cm/dyne) 15
Stylus Size/Shape .3x.7/Elliptical
Load Impedance 47k Ohms
Tracking Force Range 1.6-2.0 grams
Recommended Force 1.8 grams
Cartridge Weight 6.3 grams

Audio Note CDT I / II

SPECIFICATIONS
Optical pick-up: 3 beam laser
Semi-conductor laser: 780 nm
Power source: AC 100-120V/220-240V 50/60 Hz
Fuse: 240V – 800 mA Anti-surge
120V – 800 mA Anti-surge
Dimensions: 300 (W) x 142 (H) x 430 (D) mm
Weight: 5kg
Max power consumption: 40W

Totem Model 1

Specifications
- Break in time: 150 - 200 hours
- Placement from rear wall: 1' - 4' / 305 - 1 219 mm
- Placement distance apart: 3' - 7' / 914 - 2 134 mm no toe-in, 12' / 3 658 mm with toe-in
- Frequency Response: <50 Hz - 20 kHz ± 3 dB
- Impedance: 4 ohms
- Sensitivity: 87 dB/W at 8 ohms
- Recommended Power: 15 - 120 W
- Crossover frequency: 2.7 kHz electrical and mechanical
- Woofer: 5.5" / 140 mm, 3" / 76 mm voice coil
- Tweeter: 1" / 25 mm aluminum dome, chambered
- Dimensions (w x h x d): 6.5 x 12.2 x 8.9" / 165 x 310 x 225 mm
- Volume: 7.2 l (internal)
- Weight: 4.1 kg (approx. 9 lb)

Electrocompaniet EMC-1

Line section
Single ended gain 1.6X (4dB)
Balanced gain 3.2X (10dB)
THD (1V out, 1KHz) < 0,002% Maximum output (Balanced) > 14V RMS
Channel separation
(1V out, 1KHz) > 90 dB
Equivalent input noise 4µV

Digital section
Latest version of Phillips CD PRO Top loading drive unit
24 Bit upsampler 192KHz DAC
Digital out RCA/XLR

Other
True balanced system
Mechanical filter which cancels acoustic/mechanical vibrations preventing the laser pick-up from receiving unwanted signals
FTT Power supply
Fully remote (no volume control)

Power consumption
(no load or signal) 23 W

Dimensions
Width 483 mm / 19 inches
Depth 440 mm / 17.3 inches
Height 115mm / 4.5 inches
Weight 20Kg / 44 lbs.

Richard Gray 400 Pro

RGPC 400 Pro
Dimensions: 8.5 x 9 x 6 inches (WHD)
Net weight: 30 lbs
Outlets: 4 commercial grade Hubbell,
(4 VIMAR Euro Schukos -Export)
Power Cord: Detachable. 6ft 12 AWG cord,
NEMA 5-15 Plug, 20 Amp IEC connector
Input Voltage: 240 VAC 50Hz
Output Voltage: 240 VAC 50Hz
MOV: 18,000 Joules, 480V Clamp
Noise Removal: > 45dB
Fuse: 1-20 Amp fast blow-replace with Littlefuse 3AB
Draw at Idle: < 5 watts
Maximum Capacity: (components plugged directly into unit)
20Amps
Rack Mountable:No
Indicator Light: Green Neon top mount