Saturday, December 17, 2011
Audioromy 838A Integrated Tube Single Ended Power
Tube complement:
(2) power tubes are the National NOS 813 tube.
(2) middle tubes are some sort of vintage 6922/6DJ8.
(2) outer tubes are vintage 12AU7.
(1) 5U4 rectifer tube.
Power is rated for 30 watts per channel
Philips Sirius BD373A Tube Radio MW/SW/FM
Philips Sirius BD373A
Year: 1957–1959 Type: Radio - or past WW2 tuner
Valves / Tubes 7: ECC85 ECH81 EF89 EABC80 EM80 EL84 EZ80
Principle Super-Heterodyne (Super in general); IF-Freq 460/10700 kHz
Tuned circuits 6 AM circuit(s) 11 FM-circuit(s)
Wave bands Broadcast, Long Wave, Short Wave plus FM.
Details
Power type and voltage Alternating Current supply (AC) / 220 Volt
Loudspeaker Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) - elliptical
Power out 3 W
from Radiomuseum.org Model: Sirius 373 BD373A
Material Wooden case
Shape Tablemodel with Push Buttons.
Dimensions (WHD) 430 x 260 x 195 mm / 16.9 x 10.2 x 7.7 inch
Sunday, December 11, 2011
Synthesis Magnus Tube CD Player
Technical specifications:
Total audio distorsion: < 0,1% Audio S/N ratio: > 90.0 dB
Frequency audio response: 20Hz - 20KHz 0dB
Audio output level: 1.5V
Tube output: ECC88/6DJ8
D/A conversion: 24 Bit
Frequency: 192 KHz
Controls: Front panel:
Display, infrared receiver.
Front panel keys for:
Power switch,
open,play,pause
stop,next, prev.
Rear panel: Fuse, power plug
RCA output L and R ,
Digital output.
Mechanis: Quite track CD-DVD Rom transport
Display: 32 character LCD display
Format: CD Audio (CD-DA), CD-R, CD-R/W.
Audio output connectors: RCA gold plated
Digital output connectors: RCA gold plated
Power consumption: 35W Max
Finish: Front panel:
Transparent opaque dark grey laquer
Shiny black laquer.
Body:
Dark grey
Dimensions: (w,d,h) 440x350x120mm
Weight: 6.0 Kg
Remote control:
Transmitt: Infrared RC5 code
Function Stby, play, pause, stop, rep, next,
prev, time, rew, forw.
Battery 3 X 1,5V AAA
Power consumption: 20mW Max
Finish: Transparent opaque dark grey
laquer or Shiny black laquer.
Dimensions: (w,d,h) 65x170x25mm
Weight: 230 gr. (included battery) 0.1 Kg (excluded battery)
Monitor Audio Studio 15
Description:
two-way, reflex-loaded, stand-mounted loudspeaker.
Drive-units: 1" (25mm) aluminum-alloy dome tweeter, 6.5" (170mm) aluminum-alloy cone woofer.
Crossover frequency: approximately 3kHz.
Crossover slopes: 2nd-order, 12dB/octave high-pass.
Frequency response: 35Hz–24kHz ±3dB.
Sensitivity: 88.5dB/W/m (2.83V).
Maximum spl: 120dB.
Nominal impedance: 8 ohms.
Amplifier requirements: 30–200W.
Dimensions: 20.1" (510mm) H by 7.9" (200mm) W by 8.9" (255mm)
D. Shipping weight: 48.5 lbs/pair (22kg)
Saturday, December 10, 2011
Thursday, December 8, 2011
Monday, December 5, 2011
Sunday, December 4, 2011
Friday, December 2, 2011
Thursday, December 1, 2011
Tuesday, November 29, 2011
Zingali Prelude
Technical Features Prelude.1
System Type Bass Reflex
Frequency Response 40 Hz 21 KHz
Nominal Impedence 6 Ohm
Sensitivity 90 dB 1m/1W
Crossover Frequency 1.800 Hz 6 dB oct.
Power RMS 75 Watts
Recommended Power Amplifier 10 : 100 watts
Component : Woofer 170 mm Coil 39 mm Compression Driver 25 coil
25 mm Wooden Horn Omniray GZ
Cabinet : 40 Mdf / 20 wood
Finish Matte Black
Dimensions 400 x 205 x 310
Net Weight 11 kg
Monday, November 21, 2011
General Electric 211 VT4-C
The 1940s GE VT-4-C tubes in this precisely matched pair are military spec 211 tubes. The white print on the glass has the GE logo and reads "VT-4-C MADE IN U.S.A." with matching date codes (66C4). The flashing on one tube has a cosmetic blemish near the getter (see photo), but otherwise the flashing on both tubes is in excellent condition. These tubes test as new and are precisely matched. At 500V, they test at 110% and 112% for current draw and 117% and 119% for Gm on a laboratory grade Amplitrex AT1000. At 1000V, the tubes test at 58.6 mA and 57.4 mA for current draw on a custom power supply (spec for new tubes = 56.0 mA).
Wednesday, November 16, 2011
Monday, November 14, 2011
Scott StereoMaster
Scott Stereomaster 350 Tube Tuner FM 110 Volt
Very warm sounding and very musical.
Most tubes are original Scott tubes made in USA
1 Telefunken tube made in Western Germany.
Gold face plate with small dent at bottom left corner.
Looks clean in and out.
Thursday, November 10, 2011
Wednesday, November 9, 2011
Monday, October 31, 2011
Rel T2
Specifications for the REL T 2 Subwoofer
Enclosure Type Closed box
Amplifier Power 200W high current Class AB
Drive Unit 1x8" Heavy Duty ULT active driver
1x8" ULT Passive Radiator
Variable Crossover 30Hz to 120Hz
T 3 Dimensions 375mm Height (including feet)
335mm Width
394mm Depth (including grille)
Weight 15kg
Enclosure Type Closed box
Amplifier Power 200W high current Class AB
Drive Unit 1x8" Heavy Duty ULT active driver
1x8" ULT Passive Radiator
Variable Crossover 30Hz to 120Hz
T 3 Dimensions 375mm Height (including feet)
335mm Width
394mm Depth (including grille)
Weight 15kg
Friday, October 28, 2011
Sennheiser RS 140 Wireless Balanced Headphones
Specification for Sennheiser RS 140
Main Features
Style Headband
Connection Wireless
Purpose Standard Use
Main characteristics
Connectivity: Wireless
Usage: Consumer
Compatibility: Home Audio
Design: Over the Head
Sound Mode: Stereo
Technical Features
Frequency Response: 18 Hz - 21000 kHz
Sensitivity: 110 dB
Wireless Features
Wireless Technology: RF
Battery Life: 23 Hours
Max. Transmit Range: 490 ft. / 150 m
Other Features
Volume Control: With Volume Control
Other
Weight: 280.1 g
Enacom Line Cable
Line Cable Enacom
Connect the Line Cable ENACOM between your amplifier and each audio component and clean up the clutter.
http://www.combak.net/enacom/EnacomMain.html
Friday, October 21, 2011
JM LAB FOCAL CHORUS
Description 2-way shielded sealed center channel
Speakers 2x6-1/2'' shielded Polyglass mid-bass, 1'' TNC inverted dome tweeter
Frequency response (+/- 3 dB) 57 Hz - 28 kHz
Sensitivity (2,83 V / 1 m) 91 dB
Nominal impedance 8 Ohms
Crossover frequencies 2400 Hz Max.
power handling with music program 100 W
Dimensions (H x W x D) mm 180 x 500 x 285 mm
Weight 9.5 kg
Friday, October 14, 2011
Pro Ject Debut II
PROJECT
DEBUT II TURNTABLE SPECIFICATIONS
|
|
Cartridge supplied: | Ortofon OM5E |
Tone Arm: | Fixed counter-weight design |
Belt or direct drive: | Belt |
Platter: | Metal platter |
Pitch Control: | No |
Output: | Encaptured phono cables and earth lead. |
H x W x D (mm): | 113 x 415 x 325 (lid clearance 420 mm) |
Monday, October 10, 2011
SOUND STAGE Pre Amp Power Mono Block
Sound Stage Pre Amplifier and Power Amplifier Mono Block
Pre Amplifier Tube 2 x 12ax7
Power Amplifier Tube 4 x EL84
Sunday, October 9, 2011
Saturday, October 8, 2011
Audiomeca Enkianthus DAC
- Appearance: glossy stainless steel, black polished metacrylate and gold.
- Dimensions: 430mmL x 360mmD x 103mmH
- Weight: 7 KG
- Cabinet: extremely rigid, heavy and non resonant
- Mechanical grounding: through one concealable rear spike
- Selectable digital inputs: 2 RCA coax (S/PDIF, 75ohms, 0.5V), BNC coax (S/PDIF, 75ohms, 0.5V), AES/EBU XLR (110ohms, 5V), AT&T ST-glass (option)
- Digital output: on RCA coax (to DAT, DCC etc..)
- Unbalanced Audio outputs: on 2 x RCA coax connectors (0.1ohm, 2Vrms)
- Balanced Audio outputs: on 2 x XLR connectors (0.1ohm, 2Vrms)
- All golden RCA coax connectors with Teflon insulation
- True 24 x 192 DAC conversion
- Resolution up to 24 bits (even 32)
- Automatic locking on all sampling frequencies: 32, 44.1, 48, 64, 88.2, 96, 176.4, 192kHz
- Lock on input data indicator
- Phase invert facility performed in the digital domain
- No
PLL after the input chip. Input and output clock totally
independent. A new feature and a breakthrough in the digital
processing techniques - Virtually zero jitter
- 40 bit floating point DSP for sampling rate conversion, interpolation and signal enhancement
Upgradeable open structure to any new signal format and to improved new algorithm thanks to modular construction, change. programmable gate array and DSP chips - Audiophile Audio stages with perfect phase linearity.
- Superb and neutral sound quality
- Separated power regulations for digital, audio and input sections
-
Special attention to high frequencies shielding cabinet using
absorptive and reflective properties of various material
give combination. - AC sections and Audio stages located into a separated copper box mechanically isolated from the main cabinet
Special attention paid to PCB layout - Measured performances to match (on Audio Precision)
- Frequency response: set for optimal transient response
- THD+N (1Khz, 0dBFs) better than 140dBr
- Channel separation: 125dB
- Low power consumption: 25W at 230V
- Alimentation: 100/230Volts 50/60Hz
Audio Research MCP-2
Specifications
Frequency response | ±.25dB from 20Hz to20kHz -3dB points, 5Hz and 100kHz |
---|---|
Distortion (THD) | Harmonic distortion: Less than .005% at rated output,
IHF load. Intermodulation distortion: Less than .005% at rated output, IHF load. |
Noise & hum | Less than 50nV equivalent noise with 10 ohm input (RIAA weighted). |
Gain | Switch selectable, 10dB, 16dB, 22dB, 28dB, 34dB. |
Input impedance | Switch selectable, 10 ohms, 30 ohms, 100 ohms, 300 ohms and special (can be any value from 3 ohms to 1 kOhms). |
Output impedance | 50 ohms |
Maximum inputs | 50 mV RMS |
Rated outputs | .25V RMS |
Power supplies | |
Power requirements | 105-120/210-240 VAC, 50/60Hz, 20 watts. |
Other | |
Dimensions | |
Weight | 12 lbs. (5.5 kg) Net, 16 lbs. (7.3 kg) Shipping |
Friday, October 7, 2011
Audio Research D 75 A Power Amp Mono Block
Specifications
Power output 75 Watts RMS per channel minimum into 4, 8, or 16 ohm load from 20 Hz to 15 KHz with less than 1% total harmonic distortion
Power bandwidth
Frequency response
Input sensitivity 1.5V for rated output
Input impedance 80K ohms at 20 Hz, 30K ohms at 15 KHz
Output taps
Output regulation
Overall negative feedback
Damping factor 14 at 8 ohms (1 KHz)
Distortion
Slew rate
Rise time
Hum & noise More than 80dB below rated output
Power supply energy storage
Power requirements 100,120,200,240 VAC at 50-60 Hz, 550 Watts at rated output
Tube complement (4)12AX7, (8) 6FQ7, (2 matched pairs) 6550, (1) 5881
Other
Dimensions 19" W x 7" H x 12¼" D
Weight 52 lbs.Net; 63 lbs. Shipping
Cain & Cain Abby
Cain & Cain: Abby Specifications
Cabinets and parts are in stock at factory, finished to order
Finishing program is essentially unlimited. Need a custom color ? Just ask
Standard finish is Natural Alder
Dark Finishes at additional cost - walnuts, mahoganies, cherry’s and guitar finishes
Cabinets are made of solid alder wood, not one inch of MDF present
Also now offered in natural solid maple wood at additional cost
Ported, modified Voight-pipe design which utilize single-drivers from legendary Japanese manufacturer Fostex
.
Single-driver, crossoverless
Normal Version: Fostex FE 166e driver
Nearfield Version: Fostex FF 165k driver
Sensitivity ...... 95db ~ 1 watt ~ 1 meter
Frequency Response ...... 50hz-20khz (+/- 4db)
Nominal Impedance ..... 8 ohms
Minimum Impedance .... 8 ohms
70"H x 9"D x 9"W (5.8ft H x 0.75ft D x 0.75ft W)
All Cardas - internal wiring, solder, flux and copper binding posts
Eight very heavy and sharp spikes
Counterpoint SA 7.1
Technical Summary:
The unit has two 12AX7 tubes in the phono stage and originally had two 12AY7's in the line stage. Later versions used a two 6DJ8's in the line stage to overcome a tendency of the older tube to "whistle." As with all Counterpoint preamps, there are two gain stages in the phono section with passive riaa equalization. All versions (12AY7 line stage, and the first versions of the 6DJ8 design) have a gain stage followed by a cathode-follower. Later units have a MOSFET source-follower after the 6DJ8 gain stage. There is no loop feedback Three line-level inputs. There are single pairs of tape out and main out. Input Selector, Tape monitor, Balance, Volume, Mute and Power controls. Aluminum front panel finished in black or silver anodize.
Shunyata Hydra 6
Trident Defense System
- 6,000 volts and 60,000 amps of surge protection
- NextGen thermally protected TMOVs
- Shunyata designed Venom filters (5-element)
- Hydraulic electromagnetic circuit breaker (over current protection)
- Each outlet individually filtered
- Solid copper power distribution buss
- Equivalent to an incredible 7-gauge wire
- No point-point wiring
- Detachable 20-amp power inlet
- 2400 watts (continuous – not a peak rating)
- 20-amps continuous
- 14 gauge all metal chassis
- Professional rack mount faceplate
- Threaded footers for after-market cones
- All inlets and outlets mounted on back
- Width: 19” Height: 3.5” Depth: 5.5”
- Weight: 8.0lbs
Krell CD-1
Krell CD - 1
CD / SACD / CD-R
SPECIFICATIONS
TRANSPORT Philips CDM-1M KI I with Hall effect motor; swing-arm design in a unicast frame.
LASER Single beam with glas~: lens.
DAC Single Bit with 20 Bit resolution
DIGITAL OUTPUTS 1 Fibre Optic via standard interface 1 Coaxial via RCA connector. 1 AT&TF ibre Optic via ST connector (optional)
ANALOG OUTPUTS 1 Single-ended output via RCA connectors 1 Balanced output via XLR connectors Balanced XLR output pin configuration p!n 1 Ground (shield) p!n 2 0 degrees (non-inverting) pin 3 180 degrees (inverting)
REMOTE CONTROL Wireless infrared
SPECIAL PURCHASE OPTIONS AT&Tw ide bandwidth fibre optic transmitter Black anodized face plate
DIMENSIONS 19" Wide 12" Deep 4" High with feet
WEIGHT 11 pounds unit only 22 pounds in packing
SPECIFICATIONS
TRANSPORT Philips CDM-1M KI I with Hall effect motor; swing-arm design in a unicast frame.
LASER Single beam with glas~: lens.
DAC Single Bit with 20 Bit resolution
DIGITAL OUTPUTS 1 Fibre Optic via standard interface 1 Coaxial via RCA connector. 1 AT&TF ibre Optic via ST connector (optional)
ANALOG OUTPUTS 1 Single-ended output via RCA connectors 1 Balanced output via XLR connectors Balanced XLR output pin configuration p!n 1 Ground (shield) p!n 2 0 degrees (non-inverting) pin 3 180 degrees (inverting)
REMOTE CONTROL Wireless infrared
SPECIAL PURCHASE OPTIONS AT&Tw ide bandwidth fibre optic transmitter Black anodized face plate
DIMENSIONS 19" Wide 12" Deep 4" High with feet
WEIGHT 11 pounds unit only 22 pounds in packing
Furutech ETP 60
Furutech e-TP60 power strip's specifications |
Outputs | 6 Outlets |
Voltage | AC 220-230 V 50/60 Hz |
Current | 15 A |
Dimensions | 200 x 130 x 60 mm |
Net Weight | 0.94 Kgs |
Luxman MQ 70
SPECIFICATIONS LUXMAN MQ-70
POWER OUTPUT: 45 watts per channel RMS into 8 or 4 ohm loads
at any frequency from 25Hz to 30kHz.
T.H.D.: less than 0.1% (1kHz at 10 watts into 8 ohms),
no more than 0.5% (1kHz at rated power output
into 8 ohms).
FREQUENCY RESPONSE: 10Hz~40kHz (-1dB).
INPUT SENSITIVITY: 650mV.
INPUT IMPEDANCE: 80k ohms.
S/N RATIO: better than 110dB (input shorted, IHF-A weighted).
CONTROLS: input Level Controls for each channel.
VACUUM TUBE COMPLEMENT: 6CA7 (four), 6240G (two), 12AX7 (two).
OUTPUT TRANSFORMERS: OY-15-6.5KHP High Power Type (two).
POWER CONSUMPTION: 190 watts.
DlMENSIONS: 405(W) x 165(H) x 240(D) mm (16.0" x 6.5" x 9.5").
WEIGHT: 17.0 kgs (37.4 Ibs.)
Subscribe to:
Posts (Atom)